Oleh: em44y | 12 Maret, 2010

How To Compile A Kernel – The Ubuntu Way

Version 1.0
Author: Falko Timme <ft [at] falkotimme [dot] com>
Last edited 11/05/2006

Each distribution has some specific tools to build a custom kernel from the sources. This article is about compiling a kernel on Ubuntu systems. It describes how to build a custom kernel using the latest unmodified kernel sources from www.kernel.org (vanilla kernel) so that you are independent from the kernels supplied by your distribution. It also shows how to patch the kernel sources if you need features that are not in there.

I have tested this on Ubuntu 6.10 Server (“Edgy Eft”) and Ubuntu 6.06 Desktop (“Dapper Drake”).

I want to say first that this is not the only way of setting up such a system. There are many ways of achieving this goal but this is the way I take. I do not issue any guarantee that this will work for you!

 

1 Preliminary Note

I prefer to do all the steps here as the root user. So if you haven’t already created a root login, you should do so now:

sudo passwd root

Afterwards, log in as root:

su

If you would like to work as a normal user instead of root, remember to put sudo in front of all the commands shown in this tutorial. So when I run

apt-get update

you should run

sudo apt-get update

instead, etc.

 

1.1 /bin/sh on Ubuntu 6.10 (“Edgy Eft”)

On Ubuntu 6.10, /bin/sh is a symlink to /bin/dash by default. /bin/dash seems to make problems when you compile software from the sources, at least I had that impression. That’s why I make /bin/sh a symlink to /bin/bash instead.

If you are on Ubuntu 6.10, you should do this now:

rm -f /bin/sh
ln -s /bin/bash /bin/sh

 

2 Install Required Packages For Kernel Compilation

First we update our package database:

apt-get update

Then we install all needed packages like this:

apt-get install kernel-package libncurses5-dev fakeroot wget bzip2

 

3 Download The Kernel Sources

Next we download our desired kernel to /usr/src. Go to www.kernel.org and select the kernel you want to install, e.g. linux-2.6.18.1.tar.bz2 (you can find all 2.6 kernels here: http://www.kernel.org/pub/linux/kernel/v2.6/). Then you can download it to /usr/src like this:

cd /usr/src
wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.18.1.tar.bz2

Then we unpack the kernel sources and create a symlink linux to the kernel sources directory:

tar xjf linux-2.6.18.1.tar.bz2
ln -s linux-2.6.18.1 linux
cd /usr/src/linux

 

4 Apply Patches To The Kernel Sources (Optional)

Sometimes you need drivers for hardware that isn’t supported by the new kernel by default, or you need support for virtualization techniques or some other bleeding-edge technology that hasn’t made it to the kernel yet. In all these cases you have to patch the kernel sources (provided there is a patch available…).

Now let’s assume you have downloaded the needed patch (I call it patch.bz2 in this example) to /usr/src. This is how you apply it to your kernel sources (you must still be in the /usr/src/linux directory):

bzip2 -dc /usr/src/patch.bz2 | patch -p1 –dry-run
bzip2 -dc /usr/src/patch.bz2 | patch -p1

The first command is just a test, it does nothing to your sources. If it doesn’t show errors, you can run the second command which actually applies the patch. Don’t do it if the first command shows errors!

You can also apply kernel prepatches to your kernel sources. For example, if you need a feature that is available only in kernel 2.6.19-rc4, but the full sources haven’t been released yet for this kernel. Instead, a patch-2.6.19-rc4.bz2 is available. You can apply that patch to the 2.6.18 kernel sources, but not to kernel 2.6.18.1 or 2.6.18.2, etc. This is explained on http://kernel.org/patchtypes/pre.html:

Prepatches are the equivalent to alpha releases for Linux; they live in the testing directories in the archives. They should be applied using the patch(1) utility to the source code of the previous full release with a 3-part version number (for example, the 2.6.12-rc4 prepatch should be applied to the 2.6.11 kernel sources, not, for example, 2.6.11.10.)

So if you want to compile a 2.6.19-rc4 kernel, you must download the 2.6.18 kernel sources (http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2) in step 3 instead of kernel 2.6.18.1!

This is how you apply the 2.6.19-rc4 patch to kernel 2.6.18:

cd /usr/src
wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.19-rc4.bz2
cd /usr/src/linux
bzip2 -dc /usr/src/patch-2.6.19-rc4.bz2 | patch -p1 –dry-run
bzip2 -dc /usr/src/patch-2.6.19-rc4.bz2 | patch -p1

 

8 Links

Iklan

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

Kategori

%d blogger menyukai ini: